We currently have Part Number MF10-711-30S335-4 with NSN 1650-00-529-0623 in stock. This component is manufactured by Eaton Aerospace Ltd under CAGE Code 62983 and described as Motor Hydraulic.
To get a quote , all you need to do is fill out the form for MF10-711-30S335-4 part provided below. Make sure that you fill in all the necessary details, this will help us provide the quote that meets your needs. Once you submit the form, one of our experienced representatives will get back to you with a quote in 15 minutes or less.
Note : We Will Not Share Your Information To Any Third Parties.
This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor's Terms & Conditions available athttps://www.asapsemi.com/terms-conditions.aspx. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without CAGE code 6RE77 is void.
With over 100 million parts sold, we are among the reputed independent distributors within the United States. Sourcingstreamlined.com has over 26 different distinct federal supply code categories, with more than 10 million national stock numbers from 5,000 leading manufacturers.
A national stock number, also known as an NSN, part bears an official label indicating its procurement, storage, and stocking within the Federal supply system. NSN parts are an essential part of the military and defense logistics supply chain and can have multiple part numbers under it depending on whether it has multiple manufacturers for the same part. Part number MF10-711-30S335-4 belongs to the Federal Supply Group [FSC].
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJF | THREAD DIRECTION | RIGHT-HAND AND RIGHT-HAND AND RIGHT-HAND |
| AAPL | TORQUE LOAD RATING | 60.2 INCH-POUNDS |
| AAUH | SPLINE MINOR DIAMETER | 0.536 INCHES NOMINAL |
| AAUJ | SPLINE MAJOR DIAMETER | 0.636 INCHES NOMINAL |
| AAXX | MOUNTING TYPE | FLANGE |
| ABSA | SPLINE QUANTITY | 12 |
| ABTB | MOUNTING HOLE DIAMETER | 0.343 INCHES NOMINAL |
| ABTJ | MOUNTING HOLE QUANTITY | 4 |
| ABUJ | THREAD SIZE | 0.438-20 AND 0.750-16 AND 0.750-16 |
| AEQC | OPERATING SPEED AT RATED CAPACITY IN RPM | 3750.0 |
| AGJS | PITCH DIAMETER | 0.600 INCHES NOMINAL |
| AJAB | DRIVE SHAFT TYPE | SPLINED, INVOLUTE EXTERNAL |
| AJLF | HOUSING MATERIAL | ALUMINUM ALLOY |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNF AND UNF AND UNF |
| AKCT | SHAFT ROTATION DIRECTION | CLOCKWISE |
| APJC | THREAD LOCATION | INTERNAL AND INTERNAL AND INTERNAL |
| ARQA | SHAFT PROTRUSION LENGTH | 0.750 INCHES NOMINAL |
| ASAP | SPLINE PITCH | 20/40 |
| ASMM | CONNECTION QUANTITY | 1 AND 1 AND 1 |
| AWLS | CONNECTION TYPE | DRAIN |
| AWLS | CONNECTION TYPE | INLET |
| AWLS | CONNECTION TYPE | OUTLET |
| AXFB | MAXIMUM WORKING PRESSURE RATING AT SPECIFIED TEMP RANGE | 1500 AT MINUS 65 DEG F TO PLUS 160 DEG F |
| AXFC | CONNECTION DESIGN | THREADED |
| AXFG | SPLINE PRESSURE ANGLE IN DEG | 30.0 |
| AXFH | SPLINE LENGTH | 0.812 INCHES NOMINAL |
| AXFL | SAE KEY SIZE ACCOMMODATED | AND10261 |
| AXFN | MOUNTING GOVERNMENT STANDARD | AND10261 |
| AXFP | III DISPLACEMENT TYPE | CONSTANT |
| AXFQ | CONSTANT DISPLACEMENT PER REVOLUTION | 0.378 CUBIC INCHES |
| AZFE | CONNECTION GOVERNMENT SPEC/STD | AND 10050-4; AND 10050-8; AND 10050-8 |
| AZFG | MOUNTING BOLT HOLE SPACING | 3.536 IN. BY 3.536 IN. C TO C |
| AZFH | HOUSING SURFACE TREATMENT | ANODIZED |
| FEAT | SPECIAL FEATURES | 1 SPLINE TOOTH MILLED OFF |
| ZZZV | FSC APPLICATION DATA | AIRCRAFT HYDRAULIC SYSTEM F84 |
|
Guaranteed on-time |
|
|
Customized and |
|
|
Over 5100 |
|
|
Complete Purchasing |
We Hope You Remember Us the Next Time You are Looking for NSN Parts.
Request for Quote
