We currently have Part Number S18-460-3 with NSN 6105-00-822-1759 in stock. This component is manufactured by Thermo King Corp under CAGE Code 61510 and described as Motor Alternating C.
To get a quote , all you need to do is fill out the form for S18-460-3 part provided below. Make sure that you fill in all the necessary details, this will help us provide the quote that meets your needs. Once you submit the form, one of our experienced representatives will get back to you with a quote in 15 minutes or less.
Note : We Will Not Share Your Information To Any Third Parties.
This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor's Terms & Conditions available athttps://www.asapsemi.com/terms-conditions.aspx. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without CAGE code 6RE77 is void.
With over 100 million parts sold, we are among the reputed independent distributors within the United States. Sourcingstreamlined.com has over 26 different distinct federal supply code categories, with more than 10 million national stock numbers from 5,000 leading manufacturers.
A national stock number, also known as an NSN, part bears an official label indicating its procurement, storage, and stocking within the Federal supply system. NSN parts are an essential part of the military and defense logistics supply chain and can have multiple part numbers under it depending on whether it has multiple manufacturers for the same part. Part number S18-460-3 belongs to the Federal Supply Group [FSC].
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 6105-00-822-1759 Item Description: Motor Alternating C | 6105 | 008221759 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| S18-460-3 | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJT | OVERALL HEIGHT | 6.688 INCHES |
| AAJU | III OVERALL LENGTH | 23.625 INCHES |
| AAJV | OVERALL WIDTH | 6.500 INCHES |
| ABWV | SHAFT DIAMETER | 0.624 INCHES MINIMUM SINGLE END AND 0.625 INCHES MAXIMUM SINGLE END |
| AKPS | DUTY CYCLE | CONTINUOUS |
| ANPZ | INCLOSURE FEATURE | DRIPPROOF-15 DEG |
| AXCP | WINDING TYPE | INDUCTION-PERMANENT SPLIT CAPACITOR SPLIT PHASE |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 4 SLOT |
| BFMF | COOLING METHOD | NATURAL CONVECTION VENTILATED |
| BKPQ | INCLOSURE SPECIFICATION | NEMA |
| CNMM | FRAME SIZE DESIGNATION | 56D |
| CNXS | POWER RATING | 0.3333 HORSEPOWER OUTPUT |
| CWDM | SHAFT CENTER TO MOUNTING SURFACE DISTANCE | 3.500 INCHES IDENTICAL ENDS |
| CWDT | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 3.000 INCHES |
| CWDY | TEMP RATING | 40.0 OPERATING DEG CELSIUS AND 55.0 AMBIENT DEG CELSIUS |
| CWFX | ROTOR SPEED RATING IN RPM | 1725.0 SINGLE FULL LOAD |
| CWHZ | SHAFT END CHARACTERISTIC | A5 SINGLE STYLE IDENTICAL ENDS |
| FAAZ | PHASE | SINGLE INPUT |
| FREQ | FREQUENCY IN HERTZ | 60.0 INPUT |
| AKCT | SHAFT ROTATION DIRECTION | CLOCKWISE IDENTICAL ENDS OR COUNTERCLOCKWISE IDENTICAL ENDS |
| AXGY | MOUNTING METHOD | FIXED BASE |
| CBBL | FEATURES PROVIDED | HORIZONTAL MOUNTING POSITION AND VERTICAL MOUNTING POSITION |
| CWCS | LENGTH OF SHAFT FROM HOUSING | 7.500 INCHES IDENTICAL ENDS |
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 4.875 INCHES |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 115.0 LINE TO NEUTRAL SINGLE INPUT |
|
Guaranteed on-time |
|
|
Customized and |
|
|
Over 5100 |
|
|
Complete Purchasing |
We Hope You Remember Us the Next Time You are Looking for NSN Parts.
Request for Quote
